Monitoring Equipment
To request more info, check the box(es), fill out the form below, and your request will be submitted.
CompuWeigh Corporation   

SmartWatch Digital Monitoring Systems
• Operates as a standalone system or can be easily integrated with any PLC/PC-based control system.

• Uses digital technology which results in a much more stable and accurate reporting of temperature and speed.

• Easy modular installation—sensor network configuration is extremely flexible and can accommodate just about any installation.

• Easy to use operator interface allows easy monitoring and setup of all the sensors used throughout the system.

• Utilizes high limit and differential temperature monitoring routines where one side of the piece of equipment is compared to the other side.


203-262-9400 • FAX: 203-262-9488 • sales@compuweigh.com • www.compuweigh.com • Woodbury, CT
 
Conveyor Components Co.   

Model RMS Non-Contact Motion Control
• Provides accurate and reliable speed sensing of rotating shafts and machinery.

• Unit includes a DIN rail mount, 20 ft. of lead wire, and a remote sensor.

• Signals underspeed or overspeed.



800-233-3233 • 810-679-4211 • FAX: 810-679-4510 • info@conveyorcomponents.com • www.conveyorcomponents.com • Croswell, MI
 
Conveyor Components Co.   

Model VA Vertical Belt Alignment Switch
• Utilizes explosion-proof micro switch that is UL listed and CSA certified.

• Protects legs from severe damage that may result from misalignment of vertical bucket belts.

• Gives warning signals and/or can stop the leg.



800-233-3233 • 810-679-4211 • FAX: 810-679-4510 • info@conveyorcomponents.com • www.conveyorcomponents.com • Croswell, MI
 
Conveyor Components Co.   

Model VA Vertical Belt Alignment Switch
• Utilizes explosion-proof micro switch that is UL listed and CSA certified.

• Protects legs from severe damage that may result from misalignment of vertical bucket belts.

• Gives warning signals and/or can stop the leg.


800-233-3233 • 810-679-4211 • FAX: 810-679-4510 • info@conveyorcomponents.com • www.conveyorcomponents.com • Croswell, MI
 
Electro-Sensors, Inc.   

Hazard Monitoring System
• Electro-Sentry™ Hazard Monitoring System.

• Shaft speed, belt alignment, and bearing temperature.

• Sensors output standard 4-20 mA signal.

• Straightforward installation—minimal calibration.

• No proprietary software or “black boxes” required.

• Rugged and reliable machinery protection.



800-328-6170 • 952-930-0100 • FAX: 952-930-0130 • sales@electro-sensors.com • www.electro-sensors.com • Minnetonka, MN
 
Electro-Sensors, Inc.   

SG 1000 Series Position Monitors
• Accurate position feedback—ideal for product mixing.

• Simple calibration allows
use on slide gates, valves, dampers, and more.

• Rugged explosionproof design—long life and dependability.

• Non-volatile memory—retains gate position in the event of power loss.

• Works on rack and pinion or linear driven gates, valves, and dampers.



800-328-6170 • 952-930-0100 • FAX: 952-930-0130 • sales@electro-sensors.com • www.electro-sensors.com • Minnetonka, MN
 
Electro-Sensors, Inc.   

Shaft Speed Switches
• Dirt, dust, and greaseproof switches, sensors, and discs.

• Systems available for use in hazardous locations.

• Wide variety of set point ranges and input voltages.

• Overspeed, underspeed, and reverse rotation protection.

• Easy installation and calibration.

• Rugged and reliable machinery protection.



800-328-6170 • 952-930-0100 • FAX: 952-930-0130 • sales@electro-sensors.com • www.electro-sensors.com • Minnetonka, MN
 
Electro-Sensors, Inc.   

TR400 Speed & Direction Indicator
• Displays rate or time in process.

• Optional 4-20mA and up to six relay
outputs available.

• Easy installation and setup.

• Completely field programmable.

• Single channel or quadrature
decoding.

• NEMA 4 faceplate.



800-328-6170 • 952-930-0100 • FAX: 952-930-0130 • sales@electro-sensors.com • www.electro-sensors.com • Minnetonka, MN
 
Jacobsen Holz Corporation   

Seed Corn Sheller “Flow-Thru” Moisture Monitor
Wet corn to bulk storage•


• SMST Sheller Seed Flow Moisture Monitor System generates a “real time” seed moisture profile as seed is shelled for immediate feedback of the drying process.

• Sounds alarm if “wet” corn is heading into bulk storage.

• Pictured to right: SMST main siren.



800-332-0421 • 515-465-3567 • FAX: 515-465-3568 • jim@jacobsenholz.com • www.jacobsenholz.com • Perry, IA
 
Maxi-Tronic, Inc.   

MaxiTrack Hazard Monitoring
• MaxiTrackTM Hazard Monitoring goes beyond traditional scan, display, and alarm functions—all temperature and motion sensor conditions and alarms are sent to a PC and remote display units.

• Alarm notifications include
audible, e-mail, cell-phone
messaging, and EchoTrackTM.

• Remote PC interface for new and most existing Maxi-Tronic hazard monitors.

• System available in wireless (radio) or hard-wired.



866-333-3363 • 513-398-2500 • FAX: 513-398-2536 • info@maxitronic.com • www.maxitronic.com • Mason, OH
 
Maxi-Tronic, Inc.   

Temperature Sensors
• Applications: Bearings, gear boxes, hammermills, belt misalignment, motors, mechanical drives, etc.

• Types: RTD, PTC, thermocouple, and temperature switch.

• Designs: Grease fitting insert
and surface mount.



866-333-3363 • 513-398-2500 • FAX: 513-398-2536 • info@maxitronic.com • www.maxitronic.com • Mason, OH
 
Process Control Systems, Inc.   

MAXIGARD® A5000 Series
• Complete systems to monitor
belt conveyors, bucket elevators, screw conveyors and other material handling equipment.

• Prove rotation of critical rotating equipment.

• Robust design well suited for industrial applications.

• Five-year warranty.



800-328-0738 • 952-361-3026 • FAX: 952-368-4129 • info@maxigard.com • www.maxigard.com • Chaska, MN
 
Process Control Systems, Inc.   

MAXIGARD® A6000 Series Leg Monitors
• Complete systems to monitor belt speed, belt misalignment and bearing over temperature of bucket elevators.

• Modular system can be custom designed for special applications.

• Individual sensors for each system function.

• Five-year warranty.



800-328-0738 • 952-361-3026 • FAX: 952-368-4129 • info@maxigard.com • www.maxigard.com • Chaska, MN
 
Process Control Systems, Inc.   

MAXIGARD® AM1000/AM2000 Series
• Complete systems to monitor bucket elevators, belt conveyors, screw conveyors, and other material handling equipment.

• Detects belt slipping and/or other mechanical failures.

• Prevents overloading and downtime.

• Five-year warranty.



800-328-0738 • 952-361-3026 • FAX: 952-368-4129 • info@maxigard.com • www.maxigard.com • Chaska, MN
 
Process Control Systems, Inc.   

MAXIGARD® C3000 Series Speed Transmitters

• Converts shaft RPM to a 4-20 mA or 0-10 VDC analog signal.

• Complete systems include sensor, magnetic disc or collar and
transmitter.

• Several models with flexible options for most industrial applications.

• Five-year warranty.



800-328-0738 • 952-361-3026 • FAX: 952-368-4129 • info@maxigard.com • www.maxigard.com • Chaska, MN
 
Rolfes@Boone   

Bearing Sensors/Belt Alignment
• Belt
alignment.

• Bearing monitoring.

• Slowdown monitoring.




800-265-2010 • 515-432-2010 • FAX: 515-432-5262 • info@boonegroup.com • www.rolfesatboone.com • Boone, IA
 
Siemens Energy & Automation, Inc.    

Siemens SITRANS AS100 Acoustic Sensor
• Detects flow problems, blockages, screen fault or burst filter bags immediately.
• Mounts outside the process, with no worries about cleaning and product contamination.
• Can be bolted or bonded in place in minutes— even in restricted spaces— without process shutdown.
• No moving parts and stainless steel housing sealed against dust and moisture.



800-365-8766 • 972-522-4500 • FAX: 972-522-4501 • jennifer.seiler@siemens.com • www.sea.siemens.com/ia • Grand Prairie, TX
 

For more info from selected companies, fill out the form below:

Name:
Email:
Title:
Company:
Address:
City:
State/Province:
Zip/Postal Code:
Country:
Phone:
Fax:
Type of Business:
Message:
Security code:Please enter the security code shown below:
security_code